Modification of the WORX case for EZ.

EurekaZone is supporting a new forum, Track Saw Forum. Please visit and support it. The forum here will become inactive in the near future.

Subject: Modification of the WORX case for EZ. July 4th 2008, 4:51 pm

I modified my WORX case to take the saw with the base attached. I used my RotoZip with a carbide "rasp" type cutting tool.

Modification of the WORX case for EZ. Worx_c13

The areas indicated in yellow were cut out to allow for the base.

Modification of the WORX case for EZ. Worx_c11

The areas indicated in yellow were cut out to allow for the handles. The areas indicated with orange were just rasped down to ease the pressure on the handle and the blade housing.

Modification of the WORX case for EZ. Worx_s10

The saw fits just fine, and the top can close easily. The AC-1 and AC-2 are stored in the area indicated by yellow. They must be removed to put the saw in.

Modification of the WORX case for EZ. Worx_c12

Case closed...