EZ Video links.

By Dik Harrison.
https://www.youtube.com/watch?v=T6D9FuGTQKg
------------------------------------------------------------
EZ Dust Collection.
By Dino.
Dust collection on fixed base routers. https://www.youtube.com/watch?v=078GU3wSVtU
Installing a dust shield to your CS. https://www.youtube.com/watch?v=eDTC8tRAyhk
Installing the ez dust port https://www.youtube.com/watch?v=PvnY46ckmhM
Installing a rear dust port. https://www.youtube.com/watch?v=PvnY46ckmhM
Testing the dust collection mod's. https://www.youtube.com/watch?v=SHCMvBGly_4
Dust collection on the PC 314. https://www.youtube.com/watch?v=OLdMtNVMFl8
---------------------------------------------------------------------------

By Dino.
Using the EZ Square.
How to square panels.
https://www.youtube.com/watch?v=-um1usvyMC0
-------------------------------------------------------
The Smart Clamping System.
Cutting narrow, tapered, safe and ez smart.
https://www.youtube.com/watch?v=vrrjLYn-6WY
--------------------------------------------

The Smart Router Kit.

Part #1. https://www.youtube.com/watch?v=BFkM7sMMscI
Part #2. SRK to Circlemaker. https://www.youtube.com/watch?v=yVwRcnQdrsg
Part #3. Installing the router. https://www.youtube.com/watch?v=IIDwXn2uEog
Part #4. https://www.youtube.com/watch?v=fTTMN00bdUw
Part #5. https://www.youtube.com/watch?v=V7JvvdSUsbU
Part #6. Exact dado. https://www.youtube.com/watch?v=0HFZwejP08M
Exact Dados with the SRK https://www.youtube.com/watch?v=uRuwIqjh00I
Jack miter with the SRK. By Seumas. The inventor of the Jimmy Jig.
http://sawmillcreek.org/showthread.p...759#post814759

By Peter West.

The EZ Smart Product line. https://www.youtube.com/watch?v=FJCkIC9I1-w
The Smart Table. https://www.youtube.com/watch?v=FnaVv1I0Iko
Straight and tapered cuts. https://www.youtube.com/watch?v=eTW48ENwqsA
Using the Square and Repeaters. https://www.youtube.com/watch?v=H5cib58L26A

Setup instructions.
Connecting the Rails. https://www.youtube.com/watch?v=cY036ra0wVs
Fitting the Smart Base. https://www.youtube.com/watch?v=KYoE8jLMsOs
Trimming the Antichips. https://www.youtube.com/watch?v=9ZRBim3jO18
------------------------------------------------------------------------------

The making of the SRK traveler...with ez tools.
Part #1. Edging and grooving in one pass. https://www.youtube.com/watch?v=ZNr2PkJv6Lo
Part #2. Edging and grooving in one pass. https://www.youtube.com/watch?v=mJWEbGzVpCw
Part #3. Gang cross cutting with the ez PBB. https://www.youtube.com/watch?v=Bf8H3tK6PBE
Part #4. Inside routing. https://www.youtube.com/watch?v=Xp9cTec9NB0


-----------------------------------------------------------------------------


By Dino.

Setup instructions.
Install the Smart Base. https://www.youtube.com/watch?v=vvbD-qXfMrE
Trimming the AC-1. https://www.youtube.com/watch?v=QQi7zgNjFjY
Trimming the AC-2. https://www.youtube.com/watch?v=W-Cbab111Yc
Trimming the EAC-1. Edge Anti Chip. https://www.youtube.com/watch?v=u3ghyYGFv1Y
The C-1. Connectors. https://www.youtube.com/watch?v=ecTykYhRu8c

DinoTheCarpenter wrote:

---------------------------------

The making of the SRK traveler...with ez tools.
Part #1. Edging and grooving in one pass. https://www.youtube.com/watch?v=ZNr2PkJv6Lo
Part #2. Edging and grooving in one pass. https://www.youtube.com/watch?v=mJWEbGzVpCw
Part #3. Gang cross cutting with the ez PBB. https://www.youtube.com/watch?v=Bf8H3tK6PBE
Part #4. Inside routing. https://www.youtube.com/watch?v=Xp9cTec9NB0


-----------------------------------------------------------------------------


By Dino.

Setup instructions.
Install the Smart Base. https://www.youtube.com/watch?v=vvbD-qXfMrE
Trimming the AC-1. https://www.youtube.com/watch?v=QQi7zgNjFjY
Trimming the AC-2. https://www.youtube.com/watch?v=W-Cbab111Yc
Trimming the EAC-1. Edge Anti Chip. https://www.youtube.com/watch?v=u3ghyYGFv1Y
The C-1. Connectors. https://www.youtube.com/watch?v=ecTykYhRu8c

I looked through the ones near the bottom and all the videos had been removed from youtube except for Install the Smart Base. https://www.youtube.com/watch?v=vvbD-qXfMrE

When I can, I'll check some of the others.

Looking over some more, from the bottom up,

Jack miter with the SRK. By Seumas. The inventor of the Jimmy Jig.
http://sawmillcreek.org/showthread.p...759#post814759

and

How to square panels.
https://www.youtube.com/watch?v=-um1usvyMC0

are missing. All the other links seem to work.