My EZ rails paid for themselves today!

Today I had alot of cutting to do. 6-4X8 1/2" sheets of mdf ripped to 3 1/2" strips.
24-1/4" mdf sheets crosscut to 32". Thats 82 strips of the 1/2 mdf and 72- 1/4" panels. The 1/4" panels were cut ganged 6 at a time and the 1/2" panels 3 at a time. All of the 3 1/2" strips have 3 exposed edges and reqired very little sanding. All cuts were accomplished with one man except for moving the panels onto the sawhorse. I don't think this could have been done on a tablesaw!